The supporting equipments of complete mixing plant should include: mixing plant, concrete transportation equipment, laboratory equipments, forklifts, weighbridges, pump trucks, transformers, etc.

A standard configuration of the HZS50 mixing plant requires a 100-ton cement silo. Of course, larger ones can also be used to store cement, fly ash, etc.

The mixing parts is the working part of the mixer, which consists of the mixing drum, the supporting wheel and the transmission system. The structure of the mixing drum is simplified in a double cone shape, and the barrel is welded with high and low blades, respectively, at a certain angle with the axis. When mixing, as the mixing drum rotates, the blade causes the material being lifted and dropped, so the mixing is strong and the effect is good. The mixing time of general construction concrete JZC type requires about 35S-45S.

Inside the discharge cone of the drum, a pair of discharge blades are welded. When the concrete is mixed, the rotation direction changed,the concrete discharged.

The mixing drum is supported by four supporting rollers. And the rotation of the mixing drum is realized by the bearing which is driven by electric motor through the transmission system. Reliable operation, the forward and reverse rotation is realized by the commutation of the motor.

The discharge height of the mixing station is generally 3.8 meters, but with the change of the concrete transporter, it is now adjusted to 4.1 meters.

The HZS75 batching plant has a small footprint, which is about (length and width): 29m*19m. In addition to sand and stone materials area, office area, parking area, etc., at least 5 acres are needed.

In the case that customers do not have specific requirements, many electrical components of 75m3/h batching plant are mostly made in China. If the customer has special requirements, imported components can be used.

As our industrial standard, all HZS75 concrete batching plant use the skip hopper feeding.

According to the industry standard, the measurement of all raw materials of HZS180 concrete mixing plant is a separate measurement method. If any manufacturer adopts the cumulative measurement method for any kind of raw materials, beware of being deceived.

The tapered roller bearing is damaged, replace the bearing.

The HZS180 concrete mixing plant usually uses 50 shovel

The HZS180 concrete mixing plant produced by well-known concrete mixing plant manufacturers in China has a long service life, and some can last for more than ten years. Therefore, when selecting equipment, users should choose strong manufacturers. Do not covet cheap, buy small factory equipment.

All HZS180 concrete mixing plant made in China use the feeding method of belt conveyor .

• The agitating blade of concrete mixer is seriously worn and not replaced in time, causing the gap to be too large and the stone jam is overloaded.
• The support device of stirring shaft-end is too resistant.
• The voltage is low.
• Adjust the parallelism of the track to adjust the motor brake sharing gap.

• The first limit switch of the hopper -rising is badly broken.
• The rocker arm is loose, the striker is rusted
• The rubber sheath is damaged
• Tater go inside the internal part. Repair or replace the limit switch.

Yes, of course. Logos and colors will be made depending on each client's requirement.

• The types of project concrete mixing plants mainly contain HZS25, HZS35, HZS50, HZS60, HZS75, and HZS90.
• The models of commercial concrete mixing plants mainly include HZS90, HZS120, HZS180, HZS240, 2HZS90, 2HZS120, 2HZS180, and 2HZS240.
• The types of simple concrete batching plants mainly contain YHZS25, YHZS35, and YHZS50.

Here the diesel mixer means the diesel engine drum concrete mixer, this mixer is slightly different from general drum mixers, so it has a special protection method.

1. The diesel engine is very important. Because only in the case of electricity is not convenient, we use the diesel engine. We should always check and clean the diesel tank, replace diesel.
2. Regularly inspect the attachment of diesel engines.
3. Clean up the remaining material in the mixing drum after the mixing work.
4. Frequently check the mixing blades to confirm if there’s any damage.
5. When used, the diesel engine is hot, it is better to put it in the ventilated place. Do not touch the diesel engine when the concrete mixer is working.
6. Avoid collide the mixer.
7. There is a belt in the diesel concrete mixer. Check the belt frequently to confirm its tightness and if it’s damaged.

Wish you success!

•  Packing Detail: Standard export packing 
•  Delivery Terms: Within 7-20 days after receiving the down payment 
•  Payment Terms: 30% down payment, balance before delivery. Generally, L/C, T/T, Western Union.

• The voltage and frequency of the power supply must be in accordance with the electrical requirements of the mixing equipment.
• Check the wear degree of belt conveyor before working.Check whether the oil, gas and water pressure meet the requirements.
• The specification of aggregate shall be consistent with the performance of the concrete mixer.
• Only after the concrete has been discharged can the next operation be carried out.
• When the work is finished, all the concrete in the mixer must be discharged. Then, the switches and pipes shall be closed in sequence.

• Piling sand and stone neatly,building canopy over silo roof.
• Discharging sewage to the designated sedimentation tank and clean the settling tank at regular intervals.
• Planting trees and grass in exposed area to avoid soil and water loss.